Due to excessive CPU load this circuit is not simulated on proteus but you successfully tested on real hardware.By the way the proteus simulation file and code c code can be downloaded from this link wireless home automation complete everything . This code is written in Atmel Studio version 6 but this can be done with Atmel studio 7 . If your proteus do not have RF module please download from this link and follow the instruction Rf module electronify
This project is very much similar to previous circuits but . But in my computer due to excessive cpu load this is not simulated properly . but you can try this with higher version of proteus .
This project is similar to previous transmitter receiver projects like this one . But have added relay and high voltage component in the receiver side . According to the value of UDR generated by transmitter the receiver does works accordingly . some of the concept used in this projects are below
- remote controlled LED pattern generator
- Home automation using atmega16 and simple key pad
- main concept is Remote controlled home automation without using microcontroller
- serial communication
If you do not know about serial communication and other thing like LCD interface please visit our learn avr section and enjoy your project .
warning ! : In this project we have to work with very high voltage 220volt 50Hz and it is dangerious enough to burn you . So please apply some precaution
That's all about this project . If you have any further question about this project please leave a comment below