Rules and Safety
Rule-1 Do not touch IC pins with your naked finger
Always use hand mask or instruments like twizzer to pick electronics components ,because electronics components and integrated circuits are very sensitive to voltage . From your body certain voltage or waveform cause ic damage permanently .
rule-2 check twice before power on the circuit
Check whether there is short circuit or any component missing before actually power on the cirucit .A small resistor can damage the whole circuit .
rule-3 use multimeter to find voltage
Always use multimeter to measure voltage across different section of the circuit
Rule-4 Do not play with high voltage
Do not use toungue or naked finger to test power available or not across high voltage .Do not be too smart to play with high voltage . And do not experiment taking risk with life .
Rule-5 make a habit using suitable tools
Do not use local toos like knife ,spoons pins ,etc to open your box always use standard tools that make easy what you are doing and it is safe .
Table Of Contents
section-1 Rules and safety
section-5 Signal Generator
section-6 Electricity meter
section-7 Audio analyzer
section-8 Spectrum Analyzer
section-9 Frequency meter
section-10 Magnetic Meter
section-11 Distance meter
section-13 Data Analyzer
section-14 Sensors and Transducers
section-15 Ultrasonic Sensors