This is second part of home automation without using micrcontroller . In previous part we have designed a remote controller using RF modulue . And again if you do not have RF module on proteus you can download from this link Rf module electronify Now in this section we will connect necessary home applience to the receiver side and the remote part will be left as it is . For this demo we are going to turn on fan and light only but you can connect other devices as well . and completete proteus file can be donwload from this link home automation without using microcontorller electronify
We will make this project in two part . In first part we will design a remote controller circuit using RF module and in second part we then connect home applience to our circuit . The circuit below is fully tested on real hardware and if you are doing this project in proteus then you will need a RF module transmitter and receiver library . Many proteus do not have this library so check if you have this library or not if not please download from this link Rf module electronify read the instruction provided to include this library .Or alternatively you can download complete proteus simulation file from this link Rf module simulation electronify . And the explanation is below the circuit diagram .